Drawer Baby Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An effective baby lock for drawers. I've used it for several months and made some improvements before I published it.…
- Rating
- 4.636 / 5
- Likes
- 200
- Downloads
- 617
- Makes
- 12
- Views
- 3,250
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
An effective baby lock for drawers. I've used it for several months and made some improvements before I published it. There are 3 parts "A", "B" and "C". Only "A" and "B" are strictly necessary, and "C" is an option to increase bonding strength to the drawer.
Double-sided tape is necessary for mounting, and in case of using part "C", glue is required (I have used melt glue, and super-glue).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0,2
Infill:
20%
Filament:
[
Clas Ohlsson PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Clas+Ohlsson+PLA&tag=thingiverse09-20) Any
Notes:
Part "B" needs support
Mounting sequence
With part "C" (stronger):
Glue part B on part C. put double sided tape on part C. put temporarily part A in the slot of part B (don't put tape on A yet), with the "hook" facing inwards. position the assembly in the desired position on the drawer (see picture) fix part C to the drawer. now remove part A from the assembly and put double sided tape on it. mount part A carefully back into the slot of part B, without fixing it to the side yet. keep a short distance in between the hook/snap of part A and the border of part B (I use my nail to separate them a little) and when you are happy with the position, fix part A to the side. Without part "C":Same procedure, but put the double sided tape on B instead of C.
Category: Household