Crate-mounted Water/Food Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[ADJUSTABLE SIZES] Bracket to hold Water/Food Bowl inside of dog/rabbit /reptile crate!
- Ocena
- 4,75 / 5
- Polubienia
- 25
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 804
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a simple bracket to hold a bowl inside of a dog crate. Single-piece, no hardware, no supports needed.
Included is a Fusion 360 file to adjst for a diferent Bowl diameter, bar-to-bar spacing, bracket thickness, or anything else that needs any adjustment.
The default bowl diameter is 140mm, and the bar spacing is 40mm.
I printed mine with 5 walls for additional strength. It only took ~75grams of filament.
I'd recommend printing a test piece with 0% infill, 1 wall, and 0 top layers to confirm the fit. Some regions won't come out perfectly, but the important parts should come out correctly.