80mm Hose Coarse Filter Attachment - Screw-On Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily attach this 80mm hose coarse filter to catch small objects and protect your vacuum or dust collection system
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Protect your vacuum or dust collection system from larger debris with this 80mm hose coarse filter attachment. This two-part design features a customizable mesh face, allowing you to adjust the coarseness by selecting the infill density in your slicer software. The filter screws directly onto the spirals of an 80mm flexible hose for a secure fit.
Features:
- Threaded Attachment: Screws securely onto the spirals of standard 80mm flexible hoses.
- Easy Installation: Tool-free setup—just screw on and start using.
- Coarse Filtration: Effectively captures small objects while allowing fine dust and air to pass through.
- Versatile Application: Ideal for workshops, garages, and various industrial settings where preventing larger debris is essential.
Enhance the efficiency and longevity of your vacuum or dust collection system with this 80mm hose coarse filter attachment. Download now and keep your workspace cleaner and your equipment protected!
Instructions for Adjusting Mesh Size:
- Open Your Slicer Software: Import the two-part 3D model.
- Split the Model into Parts: https://help.prusa3d.com/article/split-to-objects-parts_1751
- Select the Mesh Face Part: This is the part that forms the filter's mesh.
- Adjust Infill Density: Increase or decrease the infill density to change the mesh coarseness. Higher infill density results in a finer mesh, while lower density creates a coarser mesh.
- Remove Top and Bottom Layers: Set the top and bottom infill layers to 0 to ensure proper mesh functionality.
- Slice and Print: Once you've set the desired infill density and removed the top and bottom layers, slice the model and print both parts in place.
Enhance the efficiency and longevity of your vacuum or dust collection system with this 80mm hose coarse filter attachment. Download now and keep your workspace cleaner and your equipment protected!