Adjustable Center Scribe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 3D printed version used with your own scribing needle adjustable by using wedges, especially useful for knife makers.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 1171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: added a 3.2 mm needle version - Fits Tungsten replaceable needles from china
By using simple wedges you can freely and precisely adjust the scribing needle!

Create parallel lines to a surface, even at tiny dimensions!
For example, center of a blade
- The bottom has a needle sized cutout so you can go all the way to 0.
- It can also function as a scabbard if you have it all the way down
- SCRIBE text helps with pin orientation - its always on the larger side
- There is a round hole on the bottom side for easier handling by a finger
- Print orientation is already set - there are some bridges but its not critical, no support needed
- Needle hole is purposely tight, consider drilling for a clean size (its 3 or 3.2mm without any print offset)
ORIGIN:
My goal was to create a 3D Printed center scribe with which one would be able to draw a line on a blades edge precisely enough al the way from tip to heel.
It will not be as precise as a metal one but for that it costs close to nothing and you can use a scribing needle, that you already own.
SIZE:
Current version is made for a 3 or 3.2mm diameter needle and enough range for a 30mm distance.
Let me know if you are interested in another size and i might add it. I know there are some thick “pen” like scribing needles out there. I would like to make one like that but don't currently own any to know the size. It could possibly be adjusted for a pencil also.