1 / 3
Endpiece for a slatted frame (Schlaraffia) / Endstück für Lattenrost
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spare part for a slatted frame made by Schlaraffia. It might fit other slatted frames.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a spare part for a slatted frame, which fell into pieces after years of use. The rest of the frame was still intact, but it simply wouldn't work without an end cap.
I only needed two of them, and the alternatives available online are quite expensive.
| Inner dimensions: W: 56 mm H: 9 mm Depth: 22.5 mm | Outer dimensions: W: 57.5 mm H: 11 mm Depth: 24 mm (incl. lip) |
If this upload prevented you from buying a new slatted frame, or helped you in any other way, please buy me a coffee as I'm a caffeine addict :)
Notes:
- Recommended filament: PETG (harder TPU might work as well, but not tested)
- Layer height: 0.20
- Infill: 30% / perimeters: 3
- No supports
- Turn on fan for the overhang