1 / 3
Endpiece for a slatted frame (Schlaraffia) / Endstück für Lattenrost
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spare part for a slatted frame made by Schlaraffia. It might fit other slatted frames.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
I designed a spare part for a slatted frame, which fell into pieces after years of use. The rest of the frame was still intact, but it simply wouldn't work without an end cap.
I only needed two of them, and the alternatives available online are quite expensive.
| Inner dimensions: W: 56 mm H: 9 mm Depth: 22.5 mm | Outer dimensions: W: 57.5 mm H: 11 mm Depth: 24 mm (incl. lip) |
If this upload prevented you from buying a new slatted frame, or helped you in any other way, please buy me a coffee as I'm a caffeine addict :)
Notes:
- Recommended filament: PETG (harder TPU might work as well, but not tested)
- Layer height: 0.20
- Infill: 30% / perimeters: 3
- No supports
- Turn on fan for the overhang