1 / 16

Sovol SV08 flexible Z Joint GE5C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nadir @ CN3D

@Nadir

This will allow the gantry to have some Flex using GE5C style spherical bearings.

Ocena: 0 / 5
Polubienia: 54
Pobrania: 164
Wydruki: 0
Wyświetlenia: 2049
Oceny: 0

Aktualizacja u źródła: 26 gru 2024

Informacje o modelu

Źródło: Printables
Kategoria: Other Printer Parts & Upgrades
Licencja: Creative Commons — Attribution — Share Alike

Szczegóły Pliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 32)Remiksy (0)Kolekcje (107)

Added this pictures for reference just for an easier install

Later Edit: 08 October 2024
We have increased the opening for the GE5S Bearing since some abs material are more brutal than others and the opening was too tight.

Later edit we changed the belt clip for each corner with ca cutout for easy access for the bearings now they are called xy gantry Z1-4 mount

Later edit:

I made a small cut put in the left front gantry holder.stl and right front gantry holder.stl

to clear the front belt tensioners

Even that I didn't receive yet the SV08 I saw that the gantry it is mounted fix and a lot from the community have complained about this.

I have made this mode using the GE5S Spherical bearing in such a mode to be easy mounted BOLT ON on the factory gantry and you will NOT lose any Z height.

Print Settings
5 walls
5 top
5 bottom
0.2 LH
30-40% infill

Keep an eye on the Youtube channel I will make a video.

inspired by the mode made by hartk1213@hartk for the Voron