1 / 6
Paint Shaker with Jigsaw for Model Paints
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Paint Shaker for model paints mounted on a jigsaw blade
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Need and Fact
Most model makers are well aware of the need for a paint shaker, a fact learned from experience.
Options
- You can buy a paint shaker or …
- > > > You can print this model for your already owned jigsaw < < <
Notes
Given adaptors in the model are designed to hold the paint bottles / paint boxes of Revell and another brand (Rich). You can design your own adaptors if you need.
What else you will need
You can have 2 different setups
- 7 M3 Nuts and 7 M3 12mm Screws (if you drill your blade with 3 holes)
- A reminder; drilling a saw blade is a very tough job if the blade is of type HSS or HS
or
- 4 M3 Nuts and 4 M3 12mm Screws, 3 M3 8mm Screws (to tighten the blade which is used as is)
Attention
Please be cautious while using it, jigsaws are dangerous, always be aware of that you have tighten the screws properly and saw is attached safely.