3030 Mount (2 versions) for Xiaomi Temperature and Humidity Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3030 profile compatible side or rear mount for the Xiaomi Temperature and Humidity Monitor.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Couldn't find a 3030 mount for the Xiaomi Temperature and Humidity Monitor, so I've decided to model my own, available in two variations: side or back mount (see images) for your Prusa printer.
Pretty lightweight model, requires about 2 grams of filament of your choice. I've printed mine with black PETG to match the parts of my Mini+.
Print recommendations:
No supports or brim required. When slicing, set the model(s) in the orientation as seen on the Prusaslicer screenshot.
I recommend printing with 0.1mm layer height for clean details on the front part.
Tolerance is about 0.2mm, which provides a nice fit for the sensor. Be sure to remove any artifacting on the inside of your print (mine had a few specks of PETG hanging out, which caused the sensor to lean forward because of it's beveled rear housing.