3030 Mount (2 versions) for Xiaomi Temperature and Humidity Monitor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3030 profile compatible side or rear mount for the Xiaomi Temperature and Humidity Monitor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Couldn't find a 3030 mount for the Xiaomi Temperature and Humidity Monitor, so I've decided to model my own, available in two variations: side or back mount (see images) for your Prusa printer.
Pretty lightweight model, requires about 2 grams of filament of your choice. I've printed mine with black PETG to match the parts of my Mini+.
Print recommendations:
No supports or brim required. When slicing, set the model(s) in the orientation as seen on the Prusaslicer screenshot.
I recommend printing with 0.1mm layer height for clean details on the front part.
Tolerance is about 0.2mm, which provides a nice fit for the sensor. Be sure to remove any artifacting on the inside of your print (mine had a few specks of PETG hanging out, which caused the sensor to lean forward because of it's beveled rear housing.