Case for Galaxy A53 5G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA and TPU hard/soft case for Samsung Galaxy A53 5G
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 239
- Wydruki
- 0
- Wyświetlenia
- 928
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
The fruits of my longest labours so far. The first model I've made from scratch, and my first contribution anywhere.
Heavily inspired by a similar model: https://www.printables.com/model/187430-galaxy-a53-case.
So far I'm pretty happy with it.
Print on back. I used 0,1 mm layers. The honeycomb-pattern only goes 0,8 mm into the back, which is 1,2 mm thick. So, I started with 8 layers PLA in a nice colour, and then switched to black TPU which covered the openings in the PLA. That way there is the contrast between the colours through the pattern and better adhesion for the TPU. The whole model could be printed in TPU, but there would probably be less rigidity and less support for pressing the sidebuttons.
- Printer: Creality Ender 3 v3 KE
- TPU and PLA, or only TPU. It can not be fitted on phone if printed in only hard material
- I used no support, but it could be considered for the cut-outs in the TPU.
- No build plate adhesion
- 100% infill
- 3h, 30m on my machine, and with my coding