Replacement Track Support for Marble Run
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Track Support for Quercetti Skyrail Marble Run.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Functionally identical replacement track support for the Quercetti Skyrail marble run.
So many of our supports had broken that the marble run was practically unusable. I made a v1 that looked like the original but it required support to print. I recently had to print some more pieces and did a redesign to make a v2 part that does not require support. It prints quickly and only requires around 5g of filament.
The track fits reliably into the clip however I have noticed that sometimes the fit of the support into the holder is a little loose (I guess my printer is not perfect). I include the FreeCAD file in case you need to edit the part to fit a little tighter into the holder.
I print with 0.6 nozzle, but keep the layer height down so as to keep the track fit tight with a satisfying click.