1 / 2
Revo Nozzle Holder Voron v2.4r1 350mm — zdjęcie 1
1 / 2

Revo Nozzle Holder Voron v2.4r1 350mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Revo Nozzle Holder for Voron v2.4r1 350mm

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a Remix of Baccula's Revo Nozzle Holder for Voron v2.4 (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/baccula/revo_skirt_nozzle_holder). 

I changed the skirt  to fit my voron 2.4r1, wich has a slightly different skirt shape.

 

Bill Of Materials

  • 2x 6mm x 3mm Round Magnet
  • 2x M3 Heat-set insert
  • 2x M3x8 BHCS (SHCS will work as well)

Instructions

  • Print skirt and nozzle holder parts (the skirt piece will be placed in the right-front position of the printer).
  • Install the 2 heat-set inserts into the ends of nozzle-holder part.
  • Install 1 magnet in the skirt, and 1 in the nozzle-holder such that they attract each other when the door is installed.
  • Insert the nozzle holder into the skirt and fasten with 2 M3x8 BHCS
  • Remove the stock skirt piece from your v2.4 and install the new one in its place (Note, you will likely need an angled hex driver or ball-end driver to install the skirt bolt with the nozzle tray installed).

Tagi