1 / 5
ABF-8 (Auto Buckfoam-8) Nerf Mag-fed Auto-shotgun — zdjęcie 1
1 / 5

ABF-8 (Auto Buckfoam-8) Nerf Mag-fed Auto-shotgun

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An accessible (no electronics required) Nerf automatic, mag-fed autoshotty that fires 4 darts per cycle

Ocena
5 / 5
Polubienia
82
Pobrania
113
Wydruki
1
Wyświetlenia
2191
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A Nerf mag-fed auto-shotty using printed wheels, 20.4mm 130-180 brushed DC motors, and a generic 35mm solenoid allowing for either semi-auto or full-auto (though with a significantly limited reliably maximum cyclic ROF of maybe 240 RPM or 4 DPS). It shoots these “rounds” in a wide, horizontally biased spread that is difficult to dodge within its effective range of about 30-40 feet.

Having gotten to play with the people at HANU for my college life, I got to see snakerbot's P16, which was way too much fun to shoot. However, most Nerfers aren't able or willing to build DIY brushless blasters, and the goal of making a more accessible blaster that used these mags immediately came to mind. After almost two years of procrastinating this blaster's release, it's still a bit rough around the edges, isn't quite as reliable as I would like, but it functions respectably and I would prefer to leave the files up for anyone to build upon or improve upon the concept, for which I can immediately identify multiple points of improvement.

This blaster uses [mags from the P16](https://drive.google.com/drive/folders/11WyaqO3j9DZ5r7j1QdiIPqDDO82CuKTP?usp=sharing) by snakerbot, a brushless T19-derived fully-automatic shotgun which is capable of considerably greater velocity and cyclic ROF.

Required hardware:

  • 2 M4x30 bolts
  • The rest of the M4 bolts can all be M4x8 or 12
  • 2 M3x10 bolts
  • 4 M3x14 bolts for switch mounts
  • The rest of the M3 bolts can be M3x8
  • Optional: a 8mm rod, 200mm long for the stock, and a suitable bonder to secure the stock to the buttplate.

For the mags:

  • Any upgrade drum spring intended for Nerf drum magazines
  • A M3x25~ bolt to secure the drum spring
  • At least 220x220mm build area, the rest of the blaster will comfortably fit within 180mm.

Tagi