1 / 5
ABF-8 (Auto Buckfoam-8) Nerf Mag-fed Auto-shotgun — image 1
1 / 5

ABF-8 (Auto Buckfoam-8) Nerf Mag-fed Auto-shotgun

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An accessible (no electronics required) Nerf automatic, mag-fed autoshotty that fires 4 darts per cycle

Rating
5 / 5
Likes
83
Downloads
113
Makes
1
Views
2,199
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

A Nerf mag-fed auto-shotty using printed wheels, 20.4mm 130-180 brushed DC motors, and a generic 35mm solenoid allowing for either semi-auto or full-auto (though with a significantly limited reliably maximum cyclic ROF of maybe 240 RPM or 4 DPS). It shoots these “rounds” in a wide, horizontally biased spread that is difficult to dodge within its effective range of about 30-40 feet.

Having gotten to play with the people at HANU for my college life, I got to see snakerbot's P16, which was way too much fun to shoot. However, most Nerfers aren't able or willing to build DIY brushless blasters, and the goal of making a more accessible blaster that used these mags immediately came to mind. After almost two years of procrastinating this blaster's release, it's still a bit rough around the edges, isn't quite as reliable as I would like, but it functions respectably and I would prefer to leave the files up for anyone to build upon or improve upon the concept, for which I can immediately identify multiple points of improvement.

This blaster uses [mags from the P16](https://drive.google.com/drive/folders/11WyaqO3j9DZ5r7j1QdiIPqDDO82CuKTP?usp=sharing) by snakerbot, a brushless T19-derived fully-automatic shotgun which is capable of considerably greater velocity and cyclic ROF.

Required hardware:

  • 2 M4x30 bolts
  • The rest of the M4 bolts can all be M4x8 or 12
  • 2 M3x10 bolts
  • 4 M3x14 bolts for switch mounts
  • The rest of the M3 bolts can be M3x8
  • Optional: a 8mm rod, 200mm long for the stock, and a suitable bonder to secure the stock to the buttplate.

For the mags:

  • Any upgrade drum spring intended for Nerf drum magazines
  • A M3x25~ bolt to secure the drum spring
  • At least 220x220mm build area, the rest of the blaster will comfortably fit within 180mm.

Tags