1 / 2
This is The Way: Protector of the Nextruder LoveBoard — zdjęcie 1
1 / 2

This is The Way: Protector of the Nextruder LoveBoard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect your Nextruder with a Mandalorian and a filament straightening guide.

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. 
Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits the bill perfect for this design. 

I often use ProtoPasta CF and that stuff is kind of brittle and was breaking at the idler/drive gear. I decided something was needed before the idler to straighten out the stuff, so this fit the bill perfectly. I am losing some Z height with the spool holder attached, but that's ok, I have the other lid in the drawer if needed. I added an untested model that should give full Z, additional supports will be needed.

This print:

Default settings MK4 .6 input shaper, .15 structural, Extrudr Green Tech Carbon pro filament profile. Organic supports smart fill on overhangs only. 4 perimeters, 25% rect linear infill, ironing all top layers. HW. 0.6 Micro Swiss hardened steel, plate is some gold satin texture thing I got on amazon for $25

 

Tagi