Reversed Ikea Sättning clips Cable management box with lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips for Ikea Sättning Cable management box with lid intended to use two boxes to make one larger cable management box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Clips for IKEA SÄTTNING cable management box with lid made to use two boxes in order to make one larger box that fits large routers + extension cord + cables and so on.
SÄTTING cable management box with lid - IKEA
clips are made to use one box as the base and once box as the lid to make more space. The orginal lid can be placed on top ("reversed bottom" of top box) to maintain the original look of the produkt.
The clips in the pictures is printed on Prusa Mini +, 6 at the same time with the speed standars IS (input shaping) profile and Prusament PLA. Preferable use white material to match the box.
The clips are printed as a “H” facing upwards on the printbed with a brim. Brim can be removed if you wish not to remove (deburing) any PLA after print is finished, if so make sure printbed is very clean.
In order to assemble the box simplu put desired amount of clips (6 in pictures) on the bottom after filling the bottom part with cords and other stuff. Add the top part, and optional orginal lid.
BR/F