The Vault
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mechanical Vault Door
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Here is a mechanical vault door mechanism that was stuck in my mind. The individual pieces fit well together. For some of the parts i used screws to fix them (with brass inserts M4 and M6). I cut the main container so i did not need supports, same for the vault door. I split out the latch arms so the door can print flat on the printbed. One more screw and a washer on the center collum that attaches the planetary gears system to the door and opening piston mechanism on the inside.
In the end i scaled everything to 150% (i went a little too small when designing it but it should still work in its original size).
I put up assembled plate files with all the parts for different color combinations and there is a Orca Slicer file too, with all the plates in one file… Enjoy