The Vault

Here is a mechanical vault door mechanism that was stuck in my mind. The individual pieces fit well together. For some of the parts i used screws to fix them (with brass inserts M4 and M6). I cut the main container so i did not need supports, same for the vault door. I split out the latch arms so the door can print flat on the printbed. One more screw and a washer on the center collum that attaches the planetary gears system to the door and opening piston mechanism on the inside. 
In the end i scaled everything to 150% (i went a little too small when designing it but it should still work in its original size).
I put up assembled plate files with all the parts for different color combinations and there is a Orca Slicer file too, with all the plates in one file… Enjoy