Tank Tread (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully Functional 3D Printable Tank Treads
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 248
- Wydruki
- 0
- Wyświetlenia
- 2511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Fully Functional &3D Printable Tank Tracks!!!!
Great for a variety of projects/robots!
Assembled Dimensions: ~2ft x 1ft x 1ft
Shaft is a 8mm (5/16") rod
Print Settings:
10 Walls
30% infill
(You can cheat on the idle rollers, idle frame, & Frame Spacer by using 10-20% infill with 6-8 walls)
No Support Needed (All parts can print flat without the use of supports)
-----------------------------------------
Uses roughly 4Kg of plastic (Rapid PLA +)
I printed everything on my AnyCubic Kobra 2 Max
-----------------------------------------
For the Treads:
35 Treads
70 Tread Links
150 M3x30
For the Gears:
Use (x20) M3x20 or M3x30 Screws
-----------------------------------------
Refer to original model for General Assembly (Obviously this is a remix, so some things will be different as mentioned in the changelog below):
-----------------------------------------