UPDATED (07/09/24) For @NeedItMakeIt LH & RH LENEAR RAILS flat PLATE ADAPTER, SE & KE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATED >> 07/09/24 >> For FLAT-PLATE. (I Strongly recommend you chose my adapter/plate combo over these)
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 546
- Wydruki
- 1
- Wyświetlenia
- 2565
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATED >> 07/09/24 >>
For MGN12C rail slides only.
This is a flat-plate adapter version of “ @NeedItMakeIt ” adapters. I made it light weight too. Let me know if they work for you.
PETG or anything that doesn't distort over time / heat.
Print 1 part at a time for best results. Slow down to 20 - 30 for outer walls & for top layer. You can speed up to 140-160 for inner walls ect.
3mm walls & top/bottom
PETG or tougher
I Strongly recommend you chose my adapter/plate combo over these. Go look in my 3D Models. Its perfect and mush lighter. Youll save ⅔ of a pound! Because it seems like there were a lot of variations in the metal base plate. A lot of people report holes not aligning correctly still. I made them to fit my metal plate.
The combo plate/adapter solves that issue.
Enjoy.