1 / 2
NV-AA1-12 Airflow Amplifier for 200mm fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noctua airflow amplifier for 200mm fans!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 1521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Scaled up the step file in Fusion 360 so the screw hole spacing was at 154mm spacing and resized the holes.
Standard fan screws work perfectly.
I initially printed it without taking into consideration the actual fan protrudes a bit on the extremities. The model is fixed to block the outer edges. Chamfered the bottom to help the outer edges a bit.
My picture shows it mounted on a Thermaltake 200mm fan Before fixing the outer edges.
