Skadis Photo Notes Picture Memo Rail

This Skadis rail can hold photos, notes or the favourite drawings from your kids. Simply slide the paper into the rail and the bar inside will grab onto it. To remove it pull firmly on the paper and it will slip out of the rail. There are different sizes available from 80mm width to 160mm width. If you have difficulties to print the tall bar simply print multiple rails and hang them side by side. The bar should be printed with fuzzy skin enabled to increase clamp strength. 

Print instructions:

• 0.4mm nozzle
• 0.2mm layer height
• 3 perimeters
• Bar: fuzzy skin on outside walls
  • Fuzzy skin thickness: 0.3mm. Fuzzy skin point distance: 0.8mm
  • Prusa Slicer: Print Settings > Layers and perimeters > Fuzzy Skin
  • BambuStudio: Others > Special mode > Fuzzy Skin
• Bar: print standing, use brim
• Rail: print top side on print bed (see images)
• Rail: use supports for the pegs on the back

Assembly:

• Install the rail on the Skadis board
• Ensure the pegs are properly seated and the back of the rail is not bend
• Ensure the brim of the bar is properly removed and not the widest part of the bar
• Insert the bar into the cutout on the side of the rail

Sizes

There are three sizes available for download. 80mm, 120mm and 160mm width. My favourite on is the 120mm version. It balances print time, space usage and clamp strength.

Modularity:

You may install as many rails side by side as you wish. They are designed to have a 0.5mm gap between them to accomplish for printer tolerance. 

Skadis Hanger / Peg

The hangers on the back of the rail are available to use in your own designs: https://www.printables.com/model/907821-skadis-universal-peg-hook