1 / 5
1-1/2" PVC Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap to casually top off the end of 1-1/2" PVC piping.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 277
- Wydruki
- 0
- Wyświetlenia
- 800
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
I made an umbrella stand beside by pool using a planter, a 5-gal bucket some stones, and a 2ft piece of 1-½" PVC piping. The inner diameter of the PVC pipe is perfect for my patio umbrella. I've sealed the bottom of the PVC pipe to prevent water from entering and accumulating in the pipe (to minimize corrosion of the umbrella pipe). This cap is to keep rain out of the pipe when the umbrella is not in place. Print in PETG.
If you like this design then click here to check out my other uploads. Happy printing!