Sprite Extruder Zero Y-offset Backplate with Bowden Coupler and 4010 Hotend Cooling for K1/CHCB-OT Hotend.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds support for reverse bowden coupler and allows for 0 Y offset probe relocation (X-offset -49) for K1 /CHCB hotend.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The CR-Touch Relocation is for K1/CHCB-OT hotend which is 10mm lowered than stock. This will design not work with the stock hotend.
If you own a sprite extruder, you probably already have used or are looking into using a zero Y-offset probe mount for better mesh generation and have replaced the original 4010 fan for part cooling. This model allows for zero Y-offset while reusing the original 4010 part cooling fan to cool the heatsink which allows for quieter much operation. You can reuse all original screws from the sprite extruder for this but requires two m3 heatset inserts for probe mounting and a PC4-M10 pneumatic coupler for the reverse bowden.