Multiboard Free-Standing Foot with Single Desk/Table Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk/Table Clamp for Multiboard with a Free-Standing Foot
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 322
- Wydruki
- 4
- Wyświetlenia
- 2109
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Multiboard Free-Standing Foot, but with a Desk Clamp underneath it, to be placed on a side of a table.
There is a double sided version where you can put the boards both above and below the table/desk. The printables link is here: https://www.printables.com/model/908123-multiboard-free-standing-foot-with-double-desktabl
…..-----===== FROM ORIGINAL MODEL PAGE =====-----…..
Attach a “free-standing foot” to your Multiboard so it stands by itself, and use it as a desk organizer.
The free-standing foot comes with two pieces: the foot and the support piece.
To set it up, you insert the foot into a hole on the bottom of your Multiboard, then you place the support piece inside the foot to secure it into place.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io