1 / 4
Headphone Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your workspace with style using our functional (and DJ-friendly) headphone stand 3D print file.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Description
Technical information for all model files:
- Nozzle size: 0.4 mm
- Layer height: 0.2 mm (Quality)
- For more durability, add:
- Infill : 15%
- 4 perimeter layers
- No support needed, except for cup holders
- Materials recommended: PLA
- Printer used for prototyping: Prusa MK4/Prusa XL
- Type of bed used for prototyping: smooth
Notes:
- All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary
- The size of the cups were chosen regarding the dimensions of:
- Cup of coffee
- Can
- Large tumblers (such as the Stanley or YETI brands)
- You can mirror the files on your slicer in order to put the cup holders on your preferred side.
- There is a small hole where you can put your headphone adapter. We've all lost one of those…
Safety tips:
- IMPORTANT : Add an adhesive (rubber, double-sided tape, fixed paste, etc.) to the parts in contact with the table, such as the top of the screw (45mm ray) and the bottom side of the top clamp(56*76mm). Otherwise, the clamp tends to slide. Find the dimensions below
- Customize at your own risk!
