1 / 4
Voron kit Sexbolt mount for Ender style beds — zdjęcie 1
1 / 4

Voron kit Sexbolt mount for Ender style beds

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rigid Sexbolt mounts for Voron kit Sexbolts, for use with my rigid sexbolt + klicky bed mount design

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
387
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sexbolt mount for Voron kit Sexbolts, for use with my rigid sexbolt + klicky bed mount design. 

The original design was intended to use the stock z endstop pcb, this allows you to use the pcb and parts included in Voron Sexbolt kits.

 

2 types, Type 2 is recommended for best compatibility (all the files containing “type 2” in the name)

Type 1:

  • Pros: Retains the rigidity of the original design.
  • Cons: Sticks out 3mm more, not all toolheads may be able to reach it. Stock X carriage likely wont be able to reach it.

Type 2:

  • Pros: Does not stick out more, Sexbolt cable can route through the back of the mount
  • Cons: Slightly less rigid (in practice this is probably barely noticable tbh). 



BOM changes (both types):

  • sexbolt
    • Voron Sexbolt kit
    • 2 M4x25 screws (These go through the sexbolt to mount it)
      • Type 1: longer bolts than a normal sexbolt because the bolts go in from the back of the sexbolt
      • Type 2:  longer bolts because the mounting plate is thick. The bolts go in from the front of the sexbolt
  • mount
    • 2 M4 heatsets
    • minus 3x M3 heatsets (for a total of 16)

 

Tagi