1 / 4
Voron kit Sexbolt mount for Ender style beds
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rigid Sexbolt mounts for Voron kit Sexbolts, for use with my rigid sexbolt + klicky bed mount design
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sexbolt mount for Voron kit Sexbolts, for use with my rigid sexbolt + klicky bed mount design.
The original design was intended to use the stock z endstop pcb, this allows you to use the pcb and parts included in Voron Sexbolt kits.
2 types, Type 2 is recommended for best compatibility (all the files containing “type 2” in the name)
Type 1:
- Pros: Retains the rigidity of the original design.
- Cons: Sticks out 3mm more, not all toolheads may be able to reach it. Stock X carriage likely wont be able to reach it.
Type 2:
- Pros: Does not stick out more, Sexbolt cable can route through the back of the mount
- Cons: Slightly less rigid (in practice this is probably barely noticable tbh).
BOM changes (both types):
- sexbolt
- Voron Sexbolt kit
- 2 M4x25 screws (These go through the sexbolt to mount it)
- Type 1: longer bolts than a normal sexbolt because the bolts go in from the back of the sexbolt
- Type 2: longer bolts because the mounting plate is thick. The bolts go in from the front of the sexbolt
- mount
- 2 M4 heatsets
- minus 3x M3 heatsets (for a total of 16)
