Dummy LGB motor block B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy replacement for LGB motor block type B
- Ocena
- 1 / 5
- Polubienia
- 11
- Pobrania
- 258
- Wydruki
- 0
- Wyświetlenia
- 1071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a dummy replacement for a LGB motor block type B. It has the same measurements to fit into the attachment points.
Reason behind this model:
The cheapest way to get a working LGB motor block (to build something else) is often to buy a used locomotive, e.g. Schöma diesel engine, which was included in a number of starter packs. But now you have a locomotive body without a motor.
This replacement can then be used to put wheels under the donor locomotive, so that the kids can still use it as a push toy.
Printing:
The parts are already aligned for printing without supports.
Print in PETG or ABS. I used default settings, those work well enough.
You will need the following extra hardware:
- 4x ball bearing (6mm outer diameter, 3mm inner diameter, 2.5mm width)
(e.g. https://www.amazon.de/gp/product/B07DVL9R2H) - 2x carbon axle (3mm diameter, ca. 50mm long)
(e.g. https://www.amazon.de/gp/product/B0B8Z6FNKN) - 7x M2 self-tapping counter-sunk screws (ca. 5 - 10mm long)
(e.g. https://www.amazon.de/gp/product/B07RYLM9N2)
The SCAD file is included. When it renders it will space out and orient the parts properly.
The SCAD file references the library af-basics.scad which can be found here: https://www.printables.com/model/175914-openscad-library-for-more-basic-shapes