Drying Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Configurable and easy to disassemble tree for quickly venting and drying hand, feet, and head-gear accessories.
This was originally designed for hand-paws, feet-paws, and a fursuit head, but has come in handy for ski boots, gloves, and other sports.
Onshape Project Link for assembly model
Standard 5.5mm x 2.1mm barrel jack
Speed control knob for quieter operation at night, and longer run time if running from battery power.
All parts printable without supports, tried to minimize reliance on printer tolerance with small compliant fit features. Printed in ABS, which has a ~2% shrinkage factor built into the model, PLA/PETG may result in a tighter fit.
Update 8/5/26:
Adjusted some geometry to make tolerance less important
Changed to a front-side-nut connector for easier assembly.
Additional parts BOM:
Description | Qty | PN/Link |
4-wire 60x60x38mm server fan (PN for reference, recommend salvage or Amazon) | 1 | |
4-pin fan connector | 1 | |
5.5mmx2.1mm DC Power Jack | 1 | |
2" PVC Double-Wye | 1 - 2 | |
M3 Heat-set inserts | 4 | McMaster # 94459A140 |
M3 x 12mm Bolts | 4 | McMaster # 91290A113 |
Fan controller | 1 |
Power supply not included, recommend a 2A 12V wall wart: Amazon,
OR
A USB-C to 5.5x2.1mm barrel jack, fixed 12V power cable: Amazon; with USB-C PD battery bank: Amazon
Questions: contact me through a link on https://fursona.directory/@Jam_Deer