1 / 6
Quadcopter frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is not yet successful. Sharing it in case any parts are useful to anyone else. It includes a frame,…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This design is not yet successful. Sharing it in case any parts are useful to anyone else. It includes a frame, battery box, prop guards, and an adapter from 23mm to 30mm PCB hole spacing. I assembled a quad using this with these parts:
- Zeez Design F7 Flight Controller
- Zeez Design 60A 3-6S BLHeli_32 4-in-1 ESC
- Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX) - might be the same as a Matek VTX HV.
- RunCam Split 3 Nano 14x14mm FPV / HD Camera
- HGLRC Forward FD1103 8000KV Brushless Motor 2S 3S RC Electric Motors DIY for Toothpick FPV Racing Drone Quad Copter Quadcopter
The motor mounts are too thin and I destroyed some motors by putting the screws in too far. So don't do that. The motors also seem to be too small to get the quad off the ground.
Category: R/C Vehicles