1 / 6
Quadcopter frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is not yet successful. Sharing it in case any parts are useful to anyone else. It includes a frame,…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This design is not yet successful. Sharing it in case any parts are useful to anyone else. It includes a frame, battery box, prop guards, and an adapter from 23mm to 30mm PCB hole spacing. I assembled a quad using this with these parts:
- Zeez Design F7 Flight Controller
- Zeez Design 60A 3-6S BLHeli_32 4-in-1 ESC
- Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX) - might be the same as a Matek VTX HV.
- RunCam Split 3 Nano 14x14mm FPV / HD Camera
- HGLRC Forward FD1103 8000KV Brushless Motor 2S 3S RC Electric Motors DIY for Toothpick FPV Racing Drone Quad Copter Quadcopter
The motor mounts are too thin and I destroyed some motors by putting the screws in too far. So don't do that. The motors also seem to be too small to get the quad off the ground.
Category: R/C Vehicles