1 / 2
X210 (QAV-X variant) VTX and ELRs antenna moutn — zdjęcie 1
1 / 2

X210 (QAV-X variant) VTX and ELRs antenna moutn

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I re-worked my old X210 frame and added a 2 in 1 antenna mount for VTX and ELRs

Ocena
0 / 5
Polubienia
0
Pobrania
25
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom 2 in 1 antenna mount for the old X210 / QAV-X frame, I re-worked my old quad and improved the VTX (added HD-Zero) and ELRs for control.

So far printed this in PLA+, but likely I anticipate with one good crash it will need to be printed in TPU, for now I'm just going to test it out and see how long it lasts.

I printed this at 0.2 and 50% infill (since its a tiny part), used a heat gun to warm/warp the antenna holder to my antenna (and let it cool back to shape, TPU would be perfect to just wrap around the antenna). 2 zip ties attached the ELRs nano antenna on the back.

Tagi