1 / 1
BearEXXA Delta P V2-R2 for Dragon Hotend
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed Delta P V2-R2 front case for the Bear extruder that allows a TL/Phaetus Dragon to be rigid mounted.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 194
- Wydruki
- 1
- Wyświetlenia
- 1672
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (2)Kolekcje (47)Powiązane
Remix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome!
NOTE: You will need 4 M2.5x5 or 6mm SHCS screws for mounting the hotend, as well as a ~35.4mm PTFE tube.
Print at 0.2mm LH in PETG/ASA/ABS/HTPET+ or similar with no supports.