WeCreat Vision 100mm Exhaust Elbow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90 Degree tight clearance exhaust elbow for WeCreat Vision laser cutter. For use with 100mm (4") flexible duct.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
100mm (4") 90 degree elbow to replace hose fitting on WeCreat Vision Laser cutter.
Factory fitting is only 75mm, comes straight off rear of machine and is actually smaller than the opening in the enclosure.
This elbow allows for a tight clearance behind machine and much higher flow at the same time. Mounts to laser enclosure in place of original fitting using original nuts. You will have to reach inside the fitting to thread the nuts on.
Adapter rings are designed to be clamped in a 100mm (4") flexible aluminum duct. They are a slip fit snugly onto elbow and 100mm VIVOSUN exhaust fan.
Models should print with little to no support required.