1 / 3
WeCreat Vision 100mm Exhaust Elbow — image 1
1 / 3

WeCreat Vision 100mm Exhaust Elbow

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

90 Degree tight clearance exhaust elbow for WeCreat Vision laser cutter. For use with 100mm (4") flexible duct.

Rating
0 / 5
Likes
16
Downloads
121
Makes
0
Views
599
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

100mm (4") 90 degree elbow to replace hose fitting on WeCreat Vision Laser cutter. 

Factory fitting is only 75mm, comes straight off rear of machine and is actually smaller than the opening in the enclosure. 

This elbow allows for a tight clearance behind machine and much higher flow at the same time. Mounts to laser enclosure in place of original fitting using original nuts. You will have to reach inside the fitting to thread the nuts on.

Adapter rings are designed to be clamped in a 100mm (4") flexible aluminum duct. They are a slip fit snugly onto elbow and 100mm VIVOSUN exhaust fan.

Models should print with little to no support required.