1 / 5
Odroid H4 Case + 2.5 or 3.5 HDD NAS And PSU — zdjęcie 1
1 / 5

Odroid H4 Case + 2.5 or 3.5 HDD NAS And PSU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Odroid H4 Plus or Ultra has 4 SATA ports. This case was designed to hold 4 SATA SSDs (or 2.5/3.5 inches HDDs) and a PSU.

Ocena
5 / 5
Polubienia
40
Pobrania
323
Wydruki
2
Wyświetlenia
6853
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v3.0

 

To assemble this case, you need several additional parts.

Parts list:

  1. 1 X 92mm x 92mm x 14mm fan (Noctua NF-A9x14)
  2. 1 X 40mm x 40mm x 10mm or 20mm fan (Noctua NF-A4x10 or Noctua NF-A4x20)
  3. 1 X LOP-200-18 or EPP-120S-15 PSU
  4. Up to 4 X SATA SSDs or 2.5 inches HDD
  5. 1 X AC inlet socket (I used this (Click) socket)
  6. 20 X M3x5x4 brass heat set insert 
  7. 20+ X M3x6 BHCS screws (You need 4 more screws per SSD)
  8. Up to 4 X SATA Data and Power Cable (200mm Link)
  9. 1 X 5.5mm DC barrel plug
  10. 1 X JST VH 3-pin connector
  11. 1 X JST VH 6-pin connector
  12. 4+ X JST VH connector pin

 

Printing:

You do not need any supports to print all parts.

If you just want 92mm case for Odroid H4, just print top and bottom.

To print h4case_92mm_top_mesh, if you use Orca slicer

  1. Go to “Objects” tab and choose “TopMesh”.
  2. Go to “Strength” tab and set Wall loops to 0.
  3. Set “Top shell layers” and “Bottom shell layers” to 0.
  4. Set “Sparse infill pattern” to “Grid” or “Honeycomb”.

You wouldn't see any difference on “Prepare” view, but after you slice it, you will see the top mesh.

 

Updates:

06/19/24

  1. Top part was modified for GPIO pin access.
  2. Bottom part was modified for GPIO pin and power button access.
  3. SSD Mount for EPP-120S-15 was added.
  4. 40mm fan mounting holes on SSD mount were modified for better printability.
  5. All previous models moved into “Legacy” folder.

 

07/28/24

  1. 3.5 inches HDD mount model added.

 

The HDD mount model is only designed for LOP-200-18 PSU. Also, you do not need to print SSD mounts. Check out the pictures belwo.

Additional parts:

  1. #6-32 UNC BHCS screws
  2. 1 X 92mm x 92mm x 14mm fan (Noctua NF-A9x14)

 

Assembly pictures:

 

Updated models (06/19/24)

 

3.5 inches HDD mount add-on (07/28/2024)

Tagi