TriZero Deck Panel with Integrated PSU Mount - LH or RH Z Chain Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable deck panel for the Trizero printer mod with an integrated mount for a Meanwell LRS-150-24 PSU
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just a simple remix of Zrunchos original deck panel to add a mounting boss for the LRS-150-24 PSU that came with my Formbot kit.
You will need 2 x Voron spec heatserts (M3 x 5 x 4) for the screw mounts and a couple of M3 x 6mm screws to attach the PSU.
Also depending on what motors you use you may need to shorten the shaft of the rear Z motor by a couple of millimetres. I am using the Stepperonline 17HE15-1504S motors for my Z and had to shave roughly 2 - 3mm off the rear motor.
If you are using longer motors for your front Z drives you may have clearance issues with the PSU however it works great with the motors I'm using. Enjoy!
EDIT (14 Jun 24) - I remembered I had mirrored the part to have my Z chain on the LHS of the printer. I have now uploaded both versions of the part so you can choose which you would prefer.