TriZero Deck Panel with Integrated PSU Mount - LH or RH Z Chain Versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable deck panel for the Trizero printer mod with an integrated mount for a Meanwell LRS-150-24 PSU
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Just a simple remix of Zrunchos original deck panel to add a mounting boss for the LRS-150-24 PSU that came with my Formbot kit.
You will need 2 x Voron spec heatserts (M3 x 5 x 4) for the screw mounts and a couple of M3 x 6mm screws to attach the PSU.
Also depending on what motors you use you may need to shorten the shaft of the rear Z motor by a couple of millimetres. I am using the Stepperonline 17HE15-1504S motors for my Z and had to shave roughly 2 - 3mm off the rear motor.
If you are using longer motors for your front Z drives you may have clearance issues with the PSU however it works great with the motors I'm using. Enjoy!
EDIT (14 Jun 24) - I remembered I had mirrored the part to have my Z chain on the LHS of the printer. I have now uploaded both versions of the part so you can choose which you would prefer.