1 / 7
Customizable Magnetic Cable Management (WIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An openscad file to generate customizable magnetic cable management solutions
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Work in progress - untested models and messy openscad within
Customizable Magnetic Cable Management
The openscad file lets you generate custom models that:
- Are properly sized for your desired cables
- Fit appropriately sized neodymium magnets (bar or disc)
- Do exactly what you need (hopefully)
Notes
- Uses BOSL2; to use this file you need to do one of the following:
- Install the library
- Download the library to a folder named BOSL2 in the same directory as magnetic-cable-management.scad
- Download the convenience zip file I have attached that has BOSL2 included
Pregenerated
There are some pre-generated models included. These models have not yet been tested; planning to fully test them soon, but the tolerances on the magnets might need dialed in. I recommend using the openscad file to generate exactly what you want instead of these.
Arches
- Small - 10mm x 3mm disc magnets
- Medium - 10mm x 3mm disc magnets
- Large - 20mm x 3mm disc magnets
- XLarge - 20mm x 3mm disc magnets
Velcro
- XSmall - 10mm x 3mm disc magnets
- Small - 18mm x 6mm disc magnets
- Standard - 18mm x 6mm disc magnets
Cable tie
- XSmall - 10mm x 3mm disc magnets
- Standard - 10mm x 3mm disc magnets
- Large - 10mm x 3mm disc magnets