1 / 4
Tools and Nozzle holder for Pusa XL (Sumo enclosure is also possible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tools and Nozzle holder for Prusa XL. Prusa XL with Sumo enclosure is also possible.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 114
- Wydruki
- 6
- Wyświetlenia
- 1094
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 11)Remiksy (1)Kolekcje (42)Powiązane
Nozzle & Tools holder for the Prusa XL.
The Pusa XL, which does not have Sumo enclosure, requires two M4 T-nuts and two M4 bolts.
Insert the T-Nut according to the tool holder hole position and fix it with two bolts.
with Sumo enclosure.
Loosen the two Sumo Enclosure Acrylic Fixing Bolts and secure the tool holder with a longer M5 bolt.
Printing..
The upper side needs to be placed on the bed because of the hole.
Support is not required.