Soldering Smoke Absorber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a soldering smoke absorber with a cartridge system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a soldering smoke absorber with a cartridge system. If you build and use this, please don't do it in a closed environment. A decent absorber needs a HEPA cartridge too! This doesn't have one (yet).
More detail about this print and all of the parts required to build it can be found in a posting here: https://bit.ly/2BunN7s
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Notes:
Warning: This isn't an easy print!
The shell pieces can take over 5-8 hours (each) on a Prusa i3 MK2 and mostly fill up the bed (an i3 MK2's is 250 x 210 x 200 mm); (lengthy side of the large pieces: 201 mm, wide side: 160 mm). Please be sure that you're committed before pressing print.
Prints requiring support: filter - cover.stl (the slot for the cartridge has an overhang when printed face down). The case filter - case.stl works best with support if possible, but you can also go without (like I did, on accident).