Soldering Smoke Absorber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a soldering smoke absorber with a cartridge system.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a soldering smoke absorber with a cartridge system. If you build and use this, please don't do it in a closed environment. A decent absorber needs a HEPA cartridge too! This doesn't have one (yet).
More detail about this print and all of the parts required to build it can be found in a posting here: https://bit.ly/2BunN7s
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Notes:
Warning: This isn't an easy print!
The shell pieces can take over 5-8 hours (each) on a Prusa i3 MK2 and mostly fill up the bed (an i3 MK2's is 250 x 210 x 200 mm); (lengthy side of the large pieces: 201 mm, wide side: 160 mm). Please be sure that you're committed before pressing print.
Prints requiring support: filter - cover.stl (the slot for the cartridge has an overhang when printed face down). The case filter - case.stl works best with support if possible, but you can also go without (like I did, on accident).