1 / 2
Microjig Matchfit Makita 1/4" Router Guides - Relief and Dovetail Tracks — zdjęcie 1
1 / 2

Microjig Matchfit Makita 1/4" Router Guides - Relief and Dovetail Tracks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guides to attach to the Makita RT0701/DRT50 plunge router base for cutting dovetail tracks

Ocena
4 / 5
Polubienia
51
Pobrania
269
Wydruki
0
Wyświetlenia
2257
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Once you have an initial relief groove cut you can use the relief guide with the Makita router plunge base to add more grooves at 4" intervals. (Swap out the original sub-base for the 3D print). 

Change to the dovetail bit, check the bit height and route one of the grooves with the relief guide. Then change to the dovetail guide, check the bit height and continue to make your final grooves.

I made this the same thickness as the existing bottom plate on the router, so the same mounting screws can be used.