1 / 2
Microjig Matchfit Makita 1/4" Router Guides - Relief and Dovetail Tracks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guides to attach to the Makita RT0701/DRT50 plunge router base for cutting dovetail tracks
- Rating
- 4 / 5
- Likes
- 51
- Downloads
- 269
- Makes
- 0
- Views
- 2,245
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Once you have an initial relief groove cut you can use the relief guide with the Makita router plunge base to add more grooves at 4" intervals. (Swap out the original sub-base for the 3D print).
Change to the dovetail bit, check the bit height and route one of the grooves with the relief guide. Then change to the dovetail guide, check the bit height and continue to make your final grooves.
I made this the same thickness as the existing bottom plate on the router, so the same mounting screws can be used.