IKEA Skadis Headphone Hanger / Holder (55mm wide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Skadis Headphone Hanger by AU3D on Makerworld: https://makerworld.com/en/models/98775#profileId-105315
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 666
- Wydruki
- 9
- Wyświetlenia
- 1698
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Description
This is a simple adaption of Tridense wall mounted headphone hanger to be used with an IKEA Skadis board. The hooks need support. The headset depicted in the image is the Logitech G Pro X, a moderately-sized gaming headset.
Lock Plug
I experienced pretty good friction between the hanger and the board but if the holder tends to slide out of the pegboard holes when you retrieve your headphone, consider printing the IKEA Skadis Lock Plug in 12mm I attached. Depending on your print settings, filament and board, you might have to choose another size.