Lenovo M920s Replacement Front Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Front Bracket for Lenovo M920s to allow for longer PCI-E cards to be installed.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 1322
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
The Lenovo M920s is a small form factor pc perfect for use as a home server. It is low cost and easy to find on ebay. It can handle GPUs that require 75 watts of power from the PCIE slot. The only issue with this PC is that the case is too small physically to slot in a longer GPU such as an Nvidia Tesla P4. To fix this I have designed a replacement front bracket for the case to allow for longer PCIE cards.
Print in ASA with paint on supports over the 3 notches touching the build plate
You will need 2x 3x10mm Hex screws and 2x 3mm nyloc nuts to install this replacement bracket.
This design does not currently allow the mounting of a 3.5 or 2.5" drive, but I have already verified that there is enough room for a 3.5" drive and just need to design a hard drive caddy for it. It will use the existing screw holes in this bracket.
I have also published a GPU fan shroud for the Nvidia Tesla P4 specifically designed to fit in the Lenovo M920s here:
https://www.printables.com/model/910977-tesla-p4-fan-shroud
You can follow this video tutorial for installation: