1 / 1
Bumper for 0.35 or 9-10mm Holes (NU50 Honda Urban Express Kickstand Bumper) — zdjęcie 1

Bumper for 0.35 or 9-10mm Holes (NU50 Honda Urban Express Kickstand Bumper)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bumper for a Honda NU50 Urban Express, but it is suitable anywhere you need a TPU bumper.

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
131
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a replacement kickstand bumper for a NU50 Honda Urban Express to prevent the kickstand from hitting the frame. However, it is suitable as a bumper for any 0.35" or 9mm hole, with some give to allow for slightly larger or smaller hole sizes.

Recommended filament would be any TPU with Shore 85 or higher. Recommended print settings are either 100% infill, or perhaps 95% or less if you need it to be more flexible. Choose the highest infill percentage you can, and it will be long-wearing.

As TPU is considered oil and gas resistant, this bumper should tolerate harsh environments without issue.

Tagi