Bumper for 0.35 or 9-10mm Holes (NU50 Honda Urban Express Kickstand Bumper)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bumper for a Honda NU50 Urban Express, but it is suitable anywhere you need a TPU bumper.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement kickstand bumper for a NU50 Honda Urban Express to prevent the kickstand from hitting the frame. However, it is suitable as a bumper for any 0.35" or 9mm hole, with some give to allow for slightly larger or smaller hole sizes.
Recommended filament would be any TPU with Shore 85 or higher. Recommended print settings are either 100% infill, or perhaps 95% or less if you need it to be more flexible. Choose the highest infill percentage you can, and it will be long-wearing.
As TPU is considered oil and gas resistant, this bumper should tolerate harsh environments without issue.